Wczytuję dane...

Audio Technica ATW-1322 zestaw bezprzewodowy

Magazyn zewnętrzny
Magazyn Zewnętrzny:
Produkt dostępny oznacza, iż produkt jest w jednym z naszych magazynów pod Warszawą. Nie ma możliwości odbioru osobistego z magazynów zewnętrznych. Produkt niedostępny oznacza, iż nie ma go w naszych magazynach zewnętrznych.
Niedostępny
3669,00 PLN

Wysyłka: Wysyłka gratis!
Producent: AUDIO TECHNICA
AUDIO TECHNICA

System 10 PRO

System Bezprzewodowy Dual Handeld Digital

Gwarancja 24 Miesiące

Opis i Dane Techniczne ze Strony Producenta:

Rack-Mount Digital Wireless System

ATW-RC13 Rack-mount receiver chassis
ATW-RU13x2 receiver unit
ATW-T1002 x2 handheld dynamic unidirectional microphone/transmitter
Select a Wireless Essentials® microphone or cable to complete the system.

Overview:
Audio-Technica’s System 10 PRO Rack-Mount digital wireless system provides

the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system
but with expanded features and versatility.
The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis
and mounted remotely (up to 328 feet away) via Ethernet cable.
Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable,
multichannel system with the simultaneous use of up to 10 channels.
Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality,
and three levels of diversity assurance: frequency, time, and space.
Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication.
Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference.
Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.
Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters,
one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only),
one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak® body-pack or ATW-T1002 handheld transmitters, or one of each.
Both the receiver chassis and transmitters feature easy-to-read displays.

Features:
Digital 24-bit/48 kHz
wireless operation for ultimate sound quality and dependable performance
Operates in the 2.4 GHz range – completely free from TV interference
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis (ten receiver units) can be linked and used simultaneously
Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and setup
Three levels of diversity assurance: frequency, time & space
Ground-lift switch helps eliminate audible hum caused by ground loops

Overall System Specifications:

Operating Frequencies:
2.4 GHz ISM band
Dynamic Range: >109 dB (A-weighted), typical
Total Harmonic Distortion: <0.05% typical="" br=""> Operating Range:
18.3 m (60') radius
36.6 m (120') diameter typical Open range environment with no interfering signals
Operating Temperature Range:0° C to +40° C (32° F to 104° F)
Battery performance may be reduced at very low temperatures
Frequency Response: 20 Hz to 20 kHz Depending on microphone type

Receiver Specifications:
Receiving System:
Diversity (frequency/time/space)
Output Connectors:
Remote Receiver Connector:
RJ45
Link Connector: RJ12
Maximum Output Level: XLR
Balanced: 0 dBV 1/4" (6.3 mm)
Unbalanced: +6 dBV
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Net Weight: 940 grams (33.2 oz)
Accessories Included:
AC adapter
Link cable
Rack-mount adapters
Joining plate
Rubber feet 


Handheld Transmitter Specifications:
RF Power Output:
10 mW
Spurious Emissions: Following federal and national regulations
Batteries: Two 1.5V AA not included
Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
Dimensions:
254.8 mm (10.03") long
50.0 mm (1.97") diameter
Net Weight: 280 grams (9.9 oz) without batteries
Accessory Included:  AT8456a Quiet-Flex™ stand clamp

Polecamy

NAPISZ DO NAS!